Skip to content

Publications Z275.2-11

Sorry, no image available for Z275.2-11

Z275.2-11 - Occupational safety code for diving operations

Publication Year:

  • 2011

Total Pages:



  • CSA

What Others Bought

  • Sorry, no image available for Z259.11-05 (R2015)


    Z259.11-05 (R2015)

    Z259.11-05 (R2015) - Energy Absorbers and Lanyards

  • Sorry, no image available for Z275.1-05 (R2012)


    Z275.1-05 (R2012)

    Z275.1-05 (R2012) - Hyperbaric Facilities

  • Sorry, no image available for Z259.1-05 (R2015)


    Z259.1-05 (R2015)

    Z259.1-05 (R2015) - Body Belts and Saddles for Work Positioning and Travel Restraint

  • Sorry, no image available for CAN/CSA-Z431-12



    CAN/CSA-Z431-12 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (Adopted IEC 60073:2002, sixth edition, 2002-05, with Canadian deviations) | Principes fondamentaux et de sécurité pour l'interface homme-machine, le marquage et l'identification - Principes de codage pour les indicateurs et les organes de commande (norme IEC 60073:2002 adoptée, sixième édition, 2002-05, avec exigences propres au Canada)

  • Sorry, no image available for CAN/CSA-Z94.4-11



    CAN/CSA-Z94.4-11 - Selection, use, and care of respirators

  • Sorry, no image available for Z275.4-12



    Z275.4-12 - Competency standard for diving, hyperbaric chamber, and remotely operated vehicle operations

  • Sorry, no image available for CAN/CSA-C22.2 NO. 60745-2-17-11 (R2015)


    CAN/CSA-C22.2 NO. 60745-2-17-11 (R2015)

    CAN/CSA-C22.2 NO. 60745-2-17-11 (R2015) - Hand-held motor operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers (Bi-national standard, with UL 60745-2-17)

  • Sorry, no image available for Z275.6-11



    Z275.6-11 - Unexploded explosive ordnance (UXO) and munitions diving

click to view next item


This is the fifth edition of CSA Z275.2, Occupational safety code for diving operations. It supersedes the previous editions published in 2004, 1992, 1982, and 1974. It is part of a series of Standards on diving and caisson systems covering hyperbaric facilities, occupational diving, and construction work in compressed air.


1.1 General

This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for occupational safety.

Note: It is recognized that certain underwater tasks may require specialized standards of practice and/or operational techniques that differ from the requirements of this Standard yet may be acceptable to the authority having jurisdiction.

Users should consult applicable provincial and federal occupational safety and health regulations to determine whether they impose safety requirements additional to or more stringent than those of this Standard.

This Standard addresses equipment requirements for the following diving systems:
(a) SCUBA diving systems (see Clause 7);
(b) surface-supply diving systems (see Clause 8);
(c) deep-diving systems (see Clause 9); and
(d) diving in contaminated environments (see Clause 10).

1.2 Limitations

This Standard does not apply to scientific diving as defined in Clause 3.

This Standard does not apply to diving operations performed solely for sport or recreation.

This Standard does not include work techniques associated with underwater diving operations.

1.3 Terminology
In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

1.4 Units of measurement
The values given in SI units are the units of record for the purposes of this standard. The values given in parentheses are for information and comparison only.

Publication type

Print Page

Tell a Friend

GST REG No R119441681
QST REG No R1006017360