Skip to content

Continuing Education Credits

Here you will find our more recent releases or standards, codes and guidelines from across multiple subject areas.

CSA Group develops and maintains more than 3,000 standards & codes harnessing the knowledge, experience and expertise of more than 8,000 volunteer members. Here you will find our most recent releases of standards, codes & guidelines from across multiple subject areas. Visit this page regularly as we are continually releasing new standards or issuing updates to standards every month resulting in nearly 500 new or updated documents each year.

Looking for more information on when a specific standard is due for release?

   Email Us: sales@csagroup.org

   Call Us Toll Free: 1-800-463-6727

   Join CSA Communities for free to participate in discussions, review and comment on draft standards, connect with industry experts and follow the          developments of standards of interest to you.

Standards Developement Area

1. Business Management

2. Construction and Engineering

3. Electrical

4. Energy

5. Environment & Climate Change

6. Health Care & Medical Devices

7. IT & Telecommunication

8. Infrastructure & Public Works

9. Mechanical & Industrial Equipment

10. Occupational Health & Safety

11. Public & Community Safety

12. Revisions — Errata / Updates

NEW RELEASES — AUGUST – SEPTEMBER 2017

Business Management

         NEW STANDARDS ARE BEING DEVELOPED

Construction and Engineering

ASME A112.18.6-2017/CSA B125.6-17
Flexible water connectors

This Standard covers flexible water connectors for use in water supply systems under continuous pressure in accessible locations; and intermittent pressure in recreational vehicles only.


learn more »

S157-17/S157.1-17
Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum

This Standard is for building applications but it is written in a form that may be used for all types of aluminum load-bearing components or assemblies.


learn more »

Electrical

C22.2 NO. 43-17
Lampholders

The requirements of this standard cover holders and connectors for electric lamps, including incandescent, fluorescent, and other electric-discharge-type lamps


learn more »

C22.2 NO. 165-17
Electric boilers

This Standard applies to stationary hot-water and steam boilers for residential, commercial, and industrial use that utilize metal-sheathed immersion-type heater elements and are intended for permanent connection to the source of supply.


learn more »

C22.2 NO. 178.3-17
Transfer switch equipment, over 1000 volts

These requirements cover automatic, non-automatic, and manual transfer switches, operating at voltages of greater than 1000 Vac, and intended for use in non-hazardous locations.


learn more »

C22.2 NO. 213-17
Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations

The purpose of this standard is to provide minimum requirements for the design, construction, and marking of electrical equipment or parts of such equipment for use in Class I and Class II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations.


learn more »

C22.2 NO. 243-17
Vacuum cleaners, blower cleaners, and household floor finishing machines

This Standard applies to motor-operated vacuum cleaners and blower cleaners, floor sweepers, and to household use floor finishing machines.


learn more »

C22.2 NO. 269.5-17
Surge protective devices - Type 5 - Components

This Standard applies to surge protective device (SPD) components designed to mitigate the effects of transient overvoltages and surge events and intended for use in surge protective devices (SPDs) or in non-SPD applications.


learn more »

CAN/CSA-C22.2 NO. 60335-2-40:17
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

This is the harmonized CSA Group and UL standard for particular requirements for electrical heat pumps, air-conditioners and dehumidifiers.


learn more »

CAN/CSA-C22.2 NO. 62133:17
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

This International Standard specifies requirements and tests for the safe operation of portable sealed SECONDARY CELLS and batteries (other than button) containing alkaline or other non-acid electrolyte, under INTENDED USE and REASONABLY FORESEEABLE MISUSE.
(disponible en version française)


learn more »

Energy

B109-17
Natural gas for vehicles installation code

This Code applies to the installation, inspection, repair, and maintenance of the fuel storage and delivery system installed in powered industrial truck applications and vehicles for use with compressed natural gas (CNG) and liquefied natural gas (LNG).


learn more »

C381.1-F17
Rendement énergétique des blocs d'alimentation externes c.a.-c.c. et c.a.-c.a.

Cette norme présente une méthode d'essai applicable au calcul du rendement énergétique des blocs d'alimentation externes dans diverses conditions de charge. Elle s'applique aux blocs d'alimentation externes c.a.-c.c. et c.a.-c.a à une seule tension et à plusieurs tensions.


learn more »

C381.2-F17
Rendement énergétique des chargeurs de piles et des blocs d'alimentation sans coupure

Cette norme énonce les exigences, définitions et méthodes d'essai applicables à la détermination de l'efficacité énergétique des chargeurs de piles.


learn more »

C746-F17
Évaluation des performances énergétiques des climatiseurs et des thermopompes de grande puissance et verticaux monoblocs

Cette norme énonce les exigences, définitions et méthodes d'essai applicables à la détermination de l'efficacité énergétique des chargeurs de piles.


learn more »

N285.0.1-F16
Commentaire sur CSA N285.0-12, Exigences générales relatives aux systèmes et aux composants sous pression des centrales nucléaires CANDU

Le but de ce commentaire est de présenter des renseignements contextuels sur divers articles et exigences de CSA N285.0.


learn more »

N288.8-F17
Établissement et mise en oeuvre de seuils d'intervention pour les rejets dans l'environnement par les installations nucléaires

Cette norme vise l'établissement et la mise en oeuvre de seuils d'intervention pour les installations nucléaires de catégorie I et les mines et usines de concentration d'uranium.


learn more »

N290.0-17/N290.2-17 PACKAGE
Consists of N290.0-17, General requirements for safety systems of nuclear power plants and N290.2-17, Requirements for emergency core cooling systems of nuclear power plants

The N290.0-17 Standard applies to the design, qualification, installation, operation, maintenance, inspection, and documentation of the safety systems for new and existing water-cooled nuclear power plants.
The N290.2-17 Standard applies the design, qualification, installation, operation, maintenance, inspection, and documentation of the emergency core cooling (ECC) system for new and existing water-cooled nuclear power plants.


learn more »

N290.17-F17
Études probabilistes de sûreté pour les centrales nucléaires

Cette norme énonce les exigences visant la préparation et la tenue à jour de l'étude probabiliste de sûreté effectuée pour les centrales nucléaires dotées d'un réacteur refroidi à l'eau.


learn more »

Z245.11-17
Steel fittings

This Standard covers wrought steel buttwelding fittings, including extruded headers and factory-made induction or cold bends, primarily intended for use in oil or gas pipeline systems.


learn more »

Z245.12-17
Steel flanges

This Standard covers wrought steel welding neck and blind flanges primarily intended for use in oil or gas pipeline systems.


learn more »

Z245.15-17
Steel valves

This Standard covers steel valves primarily intended for use in oil or gas pipeline systems.


learn more »

Environment & Climate Change

         NEW STANDARDS ARE BEING DEVELOPED

Health Care & Medical Devices

CAN/CSA-ISO 11137-3:17
Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control

This document gives guidance on meeting the requirements in ISO 11137-1 and ISO 11137-2 and in ISO/TS 13004 relating to dosimetry and its use in development, validation and routine control of a radiation sterilization process.
(disponible en version française)


learn more »

CAN/CSA-ISO 11138-1:17
Sterilization of health care products - Biological indicators - Part 1: General requirements

This document specifies general requirements for production, labelling, test methods and performance characteristics of biological indicators, including inoculated carriers and suspensions, and their components, to be used in the validation and routine monitoring of sterilization processes.
(disponible en version française)


learn more »

CAN/CSA-ISO 11138-2:17
Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes

This document specifies requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilizers and sterilization processes employing ethylene oxide gas as the sterilizing agent.
(disponible en version française)


learn more »

CAN/CSA-ISO 11138-3:17
Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes

This document specifies requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilization processes employing moist heat as the sterilizing agent.
(disponible en version française)


learn more »

CAN/CSA-ISO 11138-4:17
Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization

This document specifies requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilization processes employing dry heat as the sterilizing agent at sterilizing temperatures within the range of 120 °C to 180 °C.
(disponible en version française)


learn more »

CAN/CSA-ISO 11138-5:17
Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes

This document specifies requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilization processes employing low-temperature steam and formaldehyde as the sterilizing agent.
(disponible en version française)


learn more »

CAN/CSA-ISO 15883-6:17
Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment

This part of ISO 15883 specifies particular requirements for washer-disinfectors (WDs) intended for use when the level of assurance of disinfection that is necessary can be achieved by cleaning and thermal disinfection (A0 not less than 60) and does not require an independent automated record of critical processes to be kept.
(disponible en version française)


learn more »

CAN/CSA-ISO 15883-7:17
Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment

This part of ISO 15883 specifies the particular requirements for washer-disinfectors (WD) intended to be used for the cleaning and chemical disinfection, in a single operating cycle, of reusable items.
(disponible en version française)


learn more »

Z317.14-F17
L'orientation dans les établissements de santé

Cette norme prévoit les exigences qui visent à assurer la sûreté de l'installation et du fonctionnement de l'hémodialyse et de la dialyse péritonéale à domicile.


learn more »

Z364.5-F17
Sécurité de l'installation et du fonctionnement de l'hémodialyse et de la dialyse péritonéale à domicile

Cette norme prévoit les exigences qui visent à assurer la sûreté de l'installation et du fonctionnement de l'hémodialyse et de la dialyse péritonéale à domicile.


learn more »

Z364.6-F17
Gestion de la qualité pour les fournisseurs de dialyse rénale

Cette norme a pour but de former la base d'un SGQ dans un établissement de soins de santé ou dans un domicile, dans le but d'offrir des traitements de dialyse rénale sûrs et fiables.


learn more »

CAN/CSA-Z10524-3A:12 (R2017)
Amendment 1:2017 to CAN/CSA-Z10524-3:12, Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer

Amendment 1:2017 to CAN/CSA-Z10524-3:12, Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer.
(disponible en version française)


learn more »

CAN/CSA-Z15883-1A-09
Amendment 1:2017 to CAN/CSA-Z15883-1:09, Washer-disinfectors - Part 1: General requirements, terms and definitions and tests

Amendment 1:2017 to CAN/CSA-Z15883-1:09, Washer-disinfectors - Part 1: General requirements, terms and definitions and tests.
(disponible en version française)


learn more »

IT & Telecommunication

         NEW STANDARDS ARE BEING DEVELOPED

Infrastructure & Public Works

         NEW STANDARDS ARE BEING DEVELOPED

Mechanical & Industrial Equipment

         NEW STANDARDS ARE BEING DEVELOPED

Occupational Health & Safety

B701-17
Carer-inclusive and accommodating organizations

This Standard is intended for workplaces and is not intended for community-based program providers or public service delivery (e.g., homecare services, government income support measures).


learn more »

Z259.2.2-17
Self-retracting devices

This Standard specifies the requirements for all self-retracting devices (SRDs) used as connecting components in fall-protection systems.


learn more »

Z259.2.5-F17
Dispositifs d'arrêt de chute et cordes d'assurance verticales

Cette norme énonce les exigences en matière de conception, de mise à l'essai et de marquage des dispositifs d'arrêt de chute manufacturés destinés à des utilisateurs individuels et des cordes d'assurance verticales manufacturés.


learn more »

Z259.15-17
Anchorage connectors

This Standard specifies performance, design, testing, marking, classification, and other requirements related to anchorage connectors in travel-restraint, fall-arrest, work-positioning, and suspended component/tie-back line systems.


learn more »

Public & Community Safety

         NEW STANDARDS ARE BEING DEVELOPED

Revisions — Updates

ANSI/CSA/IGSHPA C448 SERIES-16
Design and installation of ground source heat pump systems for commercial and residential buildings

A revision to this standard is available.


learn more »

ASME A112.19.3-2017/CSA B45.4-17
Stainless steel plumbing fixtures

A revision to this standard is available.


learn more »

ASSE 1002-2015/ASME A112.1002-2015/CSA B125.12-15
Anti-siphon fill valves for water closet tanks

Update #1 to this standard is available.


learn more »

ASSE 1037-2015/ASME A112.1037-2015/CSA B125.37-15
Performance requirements for pressurized flushing devices for plumbing fixtures

Update #1 to this standard is available.


learn more »

ASSE 1070-2015/ASME A112.1070-2015/CSA B125.70-15
Performance requirements for water temperature limiting devices

Update #1 to this standard is available.


learn more »

C22.2 NO. 18.1-13
Metallic outlet boxes

Update #2 to this standard is available.


learn more »

CSA B45.5-17/IAPMO Z124-2017
Plastic plumbing fixtures

A revision to this standard is available.


learn more »

CAN/CSA-O80 SERIES-15
Wood preservation

A revision to this standard is available.
(disponible en version française)


learn more »

Z262.8-15
Face protectors for use in lacrosse

A revision to this standard is available
(disponible en version française)


learn more »

CAN/CSA-Z767-17
Process safety management

This is now a National Standard of Canada.
(disponible en version française)


learn more »