Z797-09 - Code of practice for access scaffold
What Others Bought
Z259.11-05 (R2010) - Energy Absorbers and Lanyards
CAN/CSA-Z271-10 - Safety code for suspended platforms
CAN/CSA-S269.3-M92 (R2008) - Concrete Formwork
CAN/CSA-B354.4-02 (R2013) - Self-Propelled Boom-Supported Elevating Work Platforms
Z94.3-07 (R2012) - Eye and Face Protectors
Z259.16-04 (R2009) - Design of Active Fall-Protection Systems
CAN/CSA-B335-04 (R2012) - Safety Standard for Lift Trucks
CAN/CSA-Z151-09 - Concrete pumps and placing booms
Z1006-10 - Management of work in confined spaces
C22.1-12 PACKAGE - Consists of C22.1-12, Canadian electrical code, part I (22nd edition), safety standard for electrical installations; CE code pocket reference book and the C22.1HB-12, CE code handbook, an explanation of rules of the canadian electrical code, part I
PrefaceThis is the first edition of CSA Z797, Code of practice for access scaffold. The purpose of this Standard is to provide criteria for the safe erection (in this Standard, this term includes assembling, altering, and dismantling) and use of the various types of scaffold.
Scope1. Scope This Standard applies to the erection and use of access scaffold that is(a) supported on a surface;(b) hung from multiple points, but is not capable of moving vertically or horizontally; or(c) mounted on wheels. This Standard addresses key hazards, including fall hazards, structural instability, platform failures, and material handling problems. Note: In this Standard, the term "erection" refers to the assembling, altering, or dismantling of a scaffold.
1.2 Purpose The purpose of this Standard is to provide criteria for the erection, use, and inspection of scaffold and for the training of erectors and users of such equipment to prevent personal injuries and accidents.
1.3 Equipment not covered This Standard does not apply to the following equipment: (a) falsework for construction purposes, as covered in CSA S269.1; (b) formwork, as covered in CAN/CSA-S269.3; (c) suspended access equipment, as covered in CAN/CSA-Z91 and CAN/CSA-Z271; (d) mechanical elevating work platforms, as covered in CAN/CSA-B354.1, CAN/CSA-B354.2, and CAN/CSA-B354.4; (e) manual or powered mast-climbing work platforms, such as a pump jack scaffold or equipment covered in CAN/CSA-B354.5; and (f) centre-pole scaffolds.
1.4 Terminology In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Legends to equations and figures are considered requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
1.5 Measurement The values given in SI (metric) units are the standard. The values given in parentheses are for information only.
GST REG No R119441681
QST REG No R1006017360