Passer au contenu

Publications A660-F10 (C2014)

Illustration A660-F10 (C2014) non disponible.

A660-F10 (C2014) - Certification des fabricants de systèmes de bâtiment en acier

Année de publication:

  • 2010

Nombre total de pages :

28

Confirmée:

  • 2014

Éditeur:

  • CSA

Avez-vous envisagé

  • Illustration G30.18-F09 (C2014) non disponible.

    Publications

    G30.18-F09 (C2014)

    G30.18-F09 (C2014) - Barres d'acier au carbone pour l'armature du béton

  • Illustration W55.3-F08 (C2013) non disponible.

    Publications

    W55.3-F08 (C2013)

    W55.3-F08 - Certification des compagnies de soudage par résistance de l'acier et de l'aluminium

  • Illustration S367-12 (R2016) non disponible.

    Publications

    S367-12 (R2016)

    S367-12 (R2016) - Air-, cable-, and frame-supported membrane structures

  • Illustration CAN/CSA-S157-F05/S157.1-F05 (C2015) non disponible.

    Publications

    CAN/CSA-S157-F05/S157.1-F05 (C2015)

    CAN/CSA-S157-F05/S157.1-F05 (C2015) - Calcul de la résistance mécanique des éléments en aluminium / Commentaire sur la CSA S157-05, Calcul de la résistance mécanique des éléments en aluminium

  • Illustration O86-F09 non disponible.

    Publications

    O86-F09

    O86-F09 - Règles de calcul des charpentes en bois

  • Illustration S16-F09 non disponible.

    Publications

    S16-F09

    S16-F09 - Règles de calcul des charpentes en acier

Cliquer pour voir l'article suivant

Intended Use

This Standard is intended to assist code enforcement officials and purchasers of steel building systems in determining the suitability and quality of steel buildings.

Because the manufacturer of these buildings is often remote from the building site and buildings are frequently sold through a dealer or contractor, and because local code enforcement officials may lack the capability to check the structural analysis of a building, problems may occur in determining the acceptability of such structures. It is the intent of this Standard and the accompanying certification program to help alleviate such problems.

This Standard requires that the manufacturer's production facilities, staff, and quality assurance systems be capable of reliably producing acceptable steel buildings. To ensure that these design and production capabilities are met and maintained, the Standard requires a manufacturing facility to be certified by a certification agency. In turn, the manufacturer certifies each building for a specific location by means of a certificate of design and manufacturing conformance, signed and sealed by a qualified professional engineer. This certificate lists key design criteria for review by code enforcement officials.

Type de publication

Imprimer cette page

En parler à un ami

No d'enregistrement TPS R119441681
No d'enregistrement TV du Québec R1006017360